PySS

• PySS package
  • PySS.steel_design module
    • BCs
      • BCs.__init__()
      • BCs.from_hinged()
    • CsLoads
      • CsLoads.__init__()
    • CsProps
      • CsProps.__init__()
      • CsProps.from_cs_sketch()
    • CsRHS
      • CsRHS.__init__()
      • CsRHS.calc_area()
      • CsRHS.calc_cog_y()
      • CsRHS.calc_eff_width()
      • CsRHS.calc_flat_width_radius()
      • CsRHS.calc_w_pl()
      • CsRHS.class1()
      • CsRHS.class4()
      • CsRHS.classification()
      • CsRHS.cs_classification()
      • CsRHS.from_bending()
      • CsRHS.from_compression()
      • CsRHS.from_m_prc()
      • CsRHS.from_n_prc()
      • CsRHS.plastic_allowed()
      • CsRHS.radius_from_thickness()
      • CsRHS.rhs_moi()
    • CsSketch
      • CsSketch.__init__()
    • Geometry
      • Geometry.__init__()
    • Material
      • Material.__init__()
      • Material.from_nominal()
      • Material.plastic_table()
    • Part
      • Part.__init__()
    • SimplySupportedPlate
      • SimplySupportedPlate.__init__()
    • StructProps
      • StructProps.__init__()
    • bolt2washer()
    • bolt_grade2stress()
    • bolt_min_dist()
    • calc_a_eff()
    • calc_a_eff_new()
    • chi_flex()
    • f_b_rd()
    • f_v_rd()
    • f_weld_paral()
    • f_weld_perp()
    • fabclass_2_umax()
    • gamma_m()
    • imp_factor()
    • lmbda_flex()
    • mean_list()
    • n_b_rd()
    • n_cr_flex()
    • n_cr_flex_tor()
    • n_cr_shell()
    • n_cr_shell_new()
    • n_cr_tor()
    • plate_class()
    • plate_class_new()
    • shell_length_category()
    • shell_length_category_new()
    • sigma_cr_plate()
    • sigma_x_rcr()
    • sigma_x_rcr_new()
    • sigma_x_rd()
    • sigma_x_rd_new()
    • sigma_x_rk()
    • sigma_x_rk_new()
    • stress_area()
    • test_csmprc()
    • test_csnprc()
    • test_rhs()
    • tube_class()
  • PySS.design_of_joints module
    • TjointRHS
      • TjointRHS.__init__()
      • TjointRHS.calc_c_f()
      • TjointRHS.calc_c_f_draft()
      • TjointRHS.calc_f_b_draft()
      • TjointRHS.calc_m_ip_bf_rd()
      • TjointRHS.calc_m_ip_bf_rd_draft()
      • TjointRHS.calc_m_ip_cf_rd_draft()
      • TjointRHS.calc_m_ip_cw_rd()
      • TjointRHS.calc_m_ip_cw_rd_draft()
      • TjointRHS.calc_m_prc_jj_draft()
      • TjointRHS.calc_q_f_draft()
      • TjointRHS.from_geometry()
      • TjointRHS.from_slend_beta()
      • TjointRHS.from_slend_beta_m_prc_jj()
    • test_TjointRHS()
  • PySS.lab_tests module
  • PySS.rhs_t_joint module
  • PySS.polygonal module
    • TheoreticalSpecimen
      • TheoreticalSpecimen.__init__()
      • TheoreticalSpecimen.behaviour_limit()
      • TheoreticalSpecimen.from_geometry()
      • TheoreticalSpecimen.from_pclass_area_flexslend()
      • TheoreticalSpecimen.from_pclass_area_length()
      • TheoreticalSpecimen.from_pclass_radius_flexslend()
      • TheoreticalSpecimen.from_pclass_radius_length()
      • TheoreticalSpecimen.from_pclass_thickness_length()
      • TheoreticalSpecimen.from_radius_area_length()
      • TheoreticalSpecimen.from_radius_thickness_flexslend()
      • TheoreticalSpecimen.plate_behaviour()
  • PySS.parametric module
  • PySS.scan_3D module
  • PySS.analytic_geometry module
  • PySS.fem module
  • Module contents